 |
 |
 |
| R.M.H. has a wide range of vertical trailers (type WAV and VR) with a capacity of 4m³ to 45m³, available with single, twin or triple augers. |
| • Single auger 4 – 16m³ • Twin auger 16 – 30m³ • Triple auger 30 – 45m³ (WAV) • 2- speed gearbox on VR-14 upwards (Australian Models) • Flush fit door • Rolled steel chassis • Gearbox and power shaft (no chains) • Standard weighing system included • Full width auger base |
 |
• Low maintenance machines • Can chop all large bales • Efficient mix – clamp or bale silage • Elevator options to feed all farms • Unique auger design • Optimum knife position • Mixes, blends and chops root crops • Twin sprung axle on larger machines |
All RMH machines are
fitted with the unique design auger for efficient and effective mixing of all ingredients. The augers are driven by 90 degree gearboxes (no chains) and all machines in Australia 14 cubic metres and above have a front two-speed gearbox fitted as standard. |
 |
| With two types of vertical mixer available, the new WAV models are lower in height, but a little wider. Choice of machine may often depend on any farm building restrictions. |  |
 |
DIFFERENT ELEVATORS There is a choice of elevator systems available – from a cross conveyor to feed either side to a folding elevator for feeding into a trough. These are usually fitted at the front of the tub, but may also be positioned at the rear. RMH machines can have the unique conveyor system which allows discharging to both sides in one run of the machine. If you are feeding onto the ground, you could have the door-only option (single door or multiple doors) and these can be fitted at the side or rear. |
 |
| WEIGHBOXES Weighing systems are fitted as standard on the RMH machine and the basic box gives accurate measurements of materials loaded and unloaded. You may prefer a programmable weigher and/or a radio control system and the top model enables you to link feeding to stock control and time management through a down-loadable connection to your computer. |
WHEELS An option on different wheels means that machines can be raised or lowered depending on the measurement of the buildings and troughs and the distances traveled each day. |
AXLES RMH machines are available with single axle, twin sprung axle, triple sprung axle or steering axle. The type of axle fitted will allow a smooth ride of machine, long distance road work, ability to spread the load for least damage to land surfaces and/of the ability to turn into awkward areas. |
 |
| Pictures of an Australian standard VR26 mixer |
 |
 |
 |
 |
>WAV & VR Measurements |
|
>Wav & VR Australian Specifications |
|
>Need Adobe |
| Disclaimer: Every attempt has been made to accurately describe and price components. However we reserve the right to alter prices and descriptions without notice as well as reserves the right to make changes in the design, or to add improvements to the products, without incurring an obligation on goods purchased. |
| |
 |